Water Company Secondary Water Supply Quality Monitor

The D-MULTY-S3 Drinking Water Multi-Parameter Water Quality Monitor enables real-time online monitoring of parameters such as dissolved oxygen, oxidation-reduction potential, temperature, pH, conductivity, turbidity, and liquid level in water bodies, along with data processing and display. This system is suitable for distributed, large-scale ecological environments, aquaculture, and real-time monitoring of key discharge outlets. As an intelligent environmental protection IoT product, it primarily utilizes sensor network technology and relies on internet platforms to achieve real-time monitoring and supervision of large-scale ecological environments, aquaculture, and key discharge outlets. This monitoring equipment consists of residual chlorine monitors, turbidity meters, pH transmitters, conductivity meters, monitoring instruments, and auxiliary facilities such as data acquisition and wireless transmission. It can automatically and continuously or intermittently monitor the turbidity, pH, residual chlorine, conductivity, and temperature values of community inlet water and tank water. Data is transmitted in real-time via GPRS/IoT to the regulatory authorities' platform, primarily used for the monitoring and analysis of secondary water supply quality. It enables monitoring and early warning of secondary water supply quality at key monitoring points within the jurisdiction, providing a basis for the control and management of secondary water supply facilities and water quality monitoring.

1. pH Sensor

 Range: 0 ~ 14 pH Accuracy: ±0.1 pH Resolution: 0.01 Power Supply: DC 12~24V

Operating Temperature: 0 ~ 65°C Output: RS485

2. Turbidity Sensor

 Range: 0 ~ 100 NTU Accuracy: <3%

Resolution: 0.1 Power Supply: DC 12 ~ 24V

Operating Temperature: 0 ~ 45°C Output: RS485

3. Residual Chlorine Sensor

Range: 0-2.000 mg/L Accuracy: ±5% or ±0.05 mg/L

Resolution: 0.001 mg/L Power Supply: DC 12~24V

Operating Temperature: 0 ~ 65°C Output: RS485

4. Conductivity Sensor

Range: 0.00 μS/cm - 200 mS/cm Accuracy: ±1.5% F.S. Resolution: 0.1 Power Supply: DC 12 ~ 24V

 Operating Temperature: 0 ~ 65°C Output: RS485

Main Features

l  On-site, the highly integrated multi-parameter water quality online monitor serves as the main monitoring device, acting as the sensing layer for water quality monitoring of each water tank, with data remotely uploaded via GPRS. l  Regulatory authorities such as the Health Commission ensure water quality safety and prevent the spread of diseases by monitoring the water quality at the supply endpoints.

l  Regulatory authorities such as the Water Bureau optimize production processes and enhance water quality safety by mastering water quality information at the mid-supply stage.